Jinan TONSEN Brite Beer Tank are available from 1 barrel to 100 or more barrels. The Bright(Brite) tank have the dish cover at top & bottom with the Cylinder Body. All tanks are food grade stainless steel 304 with a 3 mm thickness for 3BBL-70BBL, while larger tanks have a 4 mm thickness. The cooling system is a dimple jacket with insulated polyurathane fill. All tanks are designed for up to 14.7 PSI and tested at 30 PSI. The inside of the tanks are polished to Ra≤0.4um and the outside is a brushed finish. All tanks come standard with 25% head space on top of working volume.

Our scientific Dimple Jacket production technology can utmost ground realizes the effect of heat conduction,use high quality rock wool or polyurethane materials to insulation for the inner tank,effectively prevent heat energy leakage from the tank.advanced Lauter Tun raker systems and automatic hydraulic lifting technology,can ensure mash filter uniform and comprehensive.

20BBL Bright beer tank/Serving Tank A brite tank is a vessel used to mature, clarify and carbonate beer. It gets its name after the clear, bright beer stored and processed in it. Most breweries use brite tanks as serving vessels, too. While it would take around two weeks for beer to clarify and carbonate in a conical fermenter, a bright beer tank needs less than two days. Typical breweries have one brite tank for every four to five conicals. A special dished bottom collects the leftover yeast, letting you draw clear beer down to the very last drop. Unlike conical fermenters and other vessels, bright beer tanks yield close to 100% of the volume, letting you easily perform packaging calculations. A large, dimpled jacket on the coat makes sure the temperature inside the brite tank is always optimal. Thanks to the vertical construction of the cooling jacket, the stored liquids will be efficiently chilled even if the tank is not full to the brim. Durable, high-quality materials enable the bright beer tank to stay in pristine condition, even after years of professional usage. For brewpubs serving is often done by pumping or pressurizing the beer toward the serving location. In most breweries, the beer will be filtered after leaving the larger container and sent into bright tanks. If you want to force carbonation of bright beer, the beer can be carbonated in a fermentation tank or storage tank. In this case, the beer should be completely filled with carbonic acid to reach the bright tank. The 20BBL bright beer tank is usually used for beer maturation, secondary fermentation, beer storage, beer filling, addition & mixture of other spices, beer carbonation and beer serving etc. As a mature brewery, brite beer tank tanks are essential. Bright beer tanks are often also called serving tanks, clear beer tanks (=CBTs), bright beer tanks (=BBTs), maturation or conditioning tanks.

Tank internal and external wall are made of international quality standards of sanitary 304 stainless steel, the Polyurethane insulation thickness between the inner and outer is 50-200mm. Conic bottom install inlet and outlet pipes. Tank installation cleaning system, tank roof device, tank bottom device, rotating wine outlet tube, inflatable device, liquid level meter, sampling valve and other supporting valves, equipped with temperature sensor, with the help of PLC auto-control, the equipment can reach to automatic and semi-automatic control. The height of conic bottom is quarter of the total height. The ratio of tank diameter and height of tank is a quarter of the total height. The ratio of tank diameter and height of tank is 1:2-1:4, the cone angle usually between 60°-90°.